Seismic Aeon 180mm / 45° Truck (SINGLE)

Seismic Aeon 180mm / 45° Truck (SINGLE) Zoom

Seismic Aeon 180mm / 45° Truck (SINGLE)

.
SKU: LTR-AEN-45

Availability: In stock

£34.99
£34.99
Additional Information

    Additional Information

    SKU: LTR-AEN-45
    Brand: Seismic
    Weight: 0.25kg
    Truck Width 180mm
    Truck Style Downhill
    Truck Reverse Kingpin Yes
Product Description

    Details

    Each Seismic® Aeon™ 45-degree Truck comes with a 180mm sparkle black hanger and a 45° silver base-plate as well as high-rebound 90A blue bushings. Please note that the price is for a single truck. Order two (2) trucks for one skateboard. General setup suggestions For optimal traction, power, and control Seismic usually suggest a 45° truck at the nose and a 30° truck at the tail, with stiffer bushings at the tail than at the nose. Use two 45° trucks on symmetrical (twin-tip) freeride decks. Use stiffer bushings if you’re heavier and/or taller than average, softer bushings if you’re lighter and/or less tall. A REVOLUTION IN RKP TRUCK TECH Stabilized Geometry with no Added Parts Aeon bushings pair to form a cylindrical hollow that locks around barrel-shaped hanger elements – a true bearing with no added parts. This patented design forces the hanger to rotate inside the tubular channel in perfect alignment with the pivot axis. Eliminates slop, aligns and stabilizes geometry without the downsides of support pins, spherical bearing inserts, or hanger plugs. Quick response from centre and noticeably smoother, cleaner turns – even at deep lean angles that destabilize the steering of ordinary RKP trucks. Advanced Control Beyond barrel vs. cone: Aeon bushings have a wide hexagonal shape and tapering sides, for a smooth, intuitive resistance profile through a larger steering range. Tall but not too tall, for deep turns with no dive. Self-lubricating formula to prevent squeaking. Lightweight & Affordable Optional hollow axles, elegant body sculpting, and the first-ever hollow pivot channel (extending into bearing section). Precision engineering is what counts, and the Aeon packs it in a moderately-priced cast design. (CNC body parts add high cost with no guarantee of high performance.) Precision Fit Custom contouring creates mechanical lock between board-side bushing and base-plate – no washer needed. Faced hangers for perfect interface with inside bearings. Top of base-plate sloped for flush contact with deck concave when drop-through-mounted. (Nut seats kept flat.) Axle Height, Axle Offset, and Roll Centre Axle Height: 60.3mm / 2.37 inches from baseplate bottom to axle midpoint (34.8mm / 1.37 inches when hanger is flipped) Axle Offset (Rake): 9.0mm / 0.35 inches Roll Center: 12.7mm / 0.50 inches above axle midpoint (same distance below axle midpoint when hanger is flipped) More Axle Offset (or Rake) pushes the Roll Centre higher (towards the deck), resulting in quicker lean response and better wheel traction. Less Axle Offset (or Rake) leaves the Roll Centre lower (near the axles), resulting in better lean control and stability.
Reviews

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

CMS tab